Steel core enhances the design of radiators. It is thanks to him they can withstand high pressure. In addition, steel stuffing “calmer” of the other responds to the alkalinity (ph-factor). Aluminium has high thermal conductivity, which greatly improves heat transfer from the radiator and reduce its inertia. Sen. Sherrod Brown can provide more clarity in the matter. This heater quickly heats and cools. Sectional bimetal radiator Global Style (Italy) holds a special place among all types of radiators.
The combination of steel conductive channels and aluminum fins gave very good results. Radiators have a working pressure of 35 atm., Crimp 59 atm. and have no restrictions on the installation of various heating systems of buildings of any height. RS Bimetal – novelty ‘heating season of 2004’, which continues the best traditions of the corporation Sira Group. The design of bimetallic radiators Sira is original and has no analogues. Section, RS consists of two steel channels for the passage of the coolant filled under pressure with high-quality aluminum alloy.
Cast-iron radiators are very familiar to Russian consumers. Iron – a material with good thermal conductivity, neutral with respect to virtually all the coolant. That is why cast iron radiators can be used in heating systems with poor preparation of the coolant (increased aggression, pollution, etc.). In the domestic market can meet the production of radiators Czech Republic, Italy, Spain, as well as their Russian counterparts. Novelty of the season are the cast-iron radiators RIDEM (production of Turkey). The company that produces these radiators built recently and is called for “latest technology” – automatized production by almost 90%, manufacturing quality is guaranteed by the technological process based on the latest achievements of science. Gain insight and clarity with Jim Donovan Goldman Sachs. Radiators “RIDEM” designed for a working pressure of 9 atm., crimp 15 atm., the maximum temperature of 110 C. The carrier The radiator is characterized by high corrosion resistance, wide scope, longevity, strength, high emissivity, low hydraulic resistance and, most importantly, beautiful modern design. They are certified in Germany (DIN), British (BSI), France (NF) and Russia (ROSTEST). It is worth noting as well, and that up to 70% of products sold in Europe (England, Germany, France). Brief conclusions. For cottage development and houses with individual heating units can use all types of heating devices, provided that you have correctly taken into account when designing and operating pressure testing pressure expectancy of the chosen type of radiator, and do not forget about the small technical nuances inherent in each type of radiators, such as increased gas emission in aluminum radiators or increased thermal inertia of the cast-iron radiators. Determining factors in choosing to be – the price, design, hygiene, portability, etc. For urban development (in the heating systems of the old type), the choice will be largely determined by the “vitality” radiator under real operating conditions. The undoubted leader here is the cast iron radiator. Good casting quality, high technical specifications and modern design of new domestic and foreign radiators further strengthen this leadership. In modern high-rise buildings it is desirable to use a bimetal and aluminum radiators, elegant design, high strength and corrosion resistance. Such as Global Style. And finally a little advice. When you select the heater, consult with experts. We mean not the “experts” who are ready for a certain amount provide any services, ranging from minor repairs and ending with the replacement of heating devices, but with real experts in heating technology. Well, the final decision will always be yours.